Operating Instructions

After enjoying a whirlpool bath...

  • Drain the tub
  • Close the point-massage jets
  • Add cleaning solution, such as MTI’s Fresh Wave, in the deck-mounted reservoir
  • With Fill-Flush®, turn on the water and run for 3 minutes.
  • With Simple Touch®, press the start button; it will automatically stop.
  • Fresh water and cleaning solution circulate from air lines to water lines, through the pump, out the suction and down the drain to flush away any residue from the internal plumbing system.
  • When the process is complete, open the jets. Fresh tap water will then run out of the jets and down the drain, ensuring that the next bath is sparkling clean.