Home / Projects / Why Specify MTI / Innovation & Engineering / Clean Whirlpools

A thorough whirlpool cleaning system is as important as a complete hydrotherapy experience. MTI whirlpools with Fill-Flush® or Simple Touch®  help assure your guests of a sparkling clean whirlpool bath every time. Both systems are designed to maintain clean and hygienic whirlpool baths – for the first guest and every guest thereafter. Ideal for the hospitality industry the systems clean the internal whirlpool plumbing system in less than 5 minutes and with less than 10 gallons of water.

By their nature, whirlpool plumbing lines have a tendency to harbor soap residue, body oils, dirt and water deposits. The two patented cleaning systems offered exclusively by MTI circulate cleaning solution and fresh water through the internal plumbing system, including the water and air lines, point-massage jets and pump.

MTI’s whirlpool cleaning systems are the best on the market. They quickly, thoroughly and efficiently clean the entire whirlpool plumbing system, and they are the only ones that clean the air lines. In fact, MTI’s whirlpool cleaning systems and Fresh Wave cleaner meet the bacteria cleaning requirements for pools and spas as specified by the National Sanitation Foundation, NSF, in Standard 50.

Atmospheric Vent / Backflow Preventer is required by local and/or state code in most areas when using whirlpool cleaning systems.

Cleaning System Graphic 600x409Operation is simple and Housekeeping time is minimal. (See one-minute animated demonstration of whirlpool cleaning systems: Fill-Flush® Animated Demonstration. Simple Touch® Animated Demonstration.)

The Housekeeper simply has to close the point-massage jets, add the detergent to the deck-mounted reservoir and turn on the water. Fresh water and cleaning solution circulate from air line to water line, through the pump, out the suction and down the drain to flush away any residue from the internal plumbing system. (Simple Touch simplifies this further by turning the water flow on at the touch of a button and automatically shutting it off after 3 minutes.) When the process is complete the jets need to be opened and the water turned off. Fresh tap water will then run out of the jets and down the drain, ensuring that the bath for the next guest is sparkling clean. Click here for a chart of potential Time/Water Savings hotels can enjoy by using the MTI whirlpool cleaning systems.

Printable Housekeeping Instructions/English & Spanish.

Fill-Flush® and Simple Touch® specification sheets.

To improve the quality of the whirlpool bath while bathing, Ozone Logo 600x234MTI offers Ozone Bath Sanitation System. 200 times stronger than household bleach, yet safe and gentle enough to be used while bathing, Ozone is safe for the environment and leaves no chemical by-products. See Ozone Bath Sanitation System page.