MTI offers a choice of materials to allow you to set the look and tone for your bath space.

SculptureStone®
Boutique Collection

Mineral Composite
Designer Collection

Acrylic
Designer Collection & MTI Basics®

Made in the USA:
  • All materials and labor - 100%
  • All materials and labor - 100%
  • All materials and labor - 100%

Material Composition:
  • Engineered Solid Stone®
  • Approximately 70% of the material is organic.
  • Premium-grade ultrafine ground minerals, Quartz and Bauxite.
  • Mined in the Southeast from the best sources.
  • Premium, ultra-high-grade proprietary resin.
  • UV and performance properties are built into the high-performance resin.
  • Best material for thermal properties.
  • Approximatly 65% of the material is organic.
  • Medium-grade fine ground minerals, Granite / Dolomitic Limestone.
  • Mined locally in Georgia from a large natural granite and marble resource.
  • High-grade casting Resin.
  • The UV and performance properties are built into the Polyresin coating, specially formulated for MTI.
  • Thermal properties exceed acrylic.
  • High-gloss cross-linked cast acrylic, American made.
  • Reinforced with a thick layer of fiberglass / resin / titanium.
  • The backing adds strength, structural integrity and increased insulation.
  • Backing also helps keep bath water warm.

Process:
  • The ultrafine ground minerals are refined into a fine powder and combined with high-performance resins that are binding agents.
  • This mixture is liquefied, poured into a mold and cured.
  • Then hand-finished.
  • Ground minerals and resin (binding agents) are combined.
  • The mixture is liquefied and poured into a mold that has been sprayed with gloss coating, and then cured.
  • Then hand-finished.
  • Acrylic is thermoformed with a mold, and the back is sprayed with a thick layer of fiberglass/resin/titanium.
  • Then hand-finished.

Result:
  • 100% solid thru and thru, luxurious molded stone.
  • You can actually feel the difference.
  • Products are durable, non-porous, soft, smooth and UV- resistant.
  • Highest insulating properties keep bath water warmer longer.
  • Impact-resistant hard surface, Polyresin glossy coating.
  • Non-porous surface that is shock-resistant for durability.
  • UV- and stain-resistant.
  • High insulating properties.
  • Non-porous surface is durable and impact/shock resistant.
  • UV- and stain-resistant.
  • Good insulating properties.

Colors:
  • Material Colors: White or Buscuit
  • Coating : White
  • Material Colors: White or Buscuit

Finishes:
  • Soft matte or hand-polished deep gloss finish
  • Glossy finish
  • Glossy finish

Sanitary:
  • Stain-, mold- and mildew-resistant.
  • Stain-, mold- and mildew-resistant.
  • Stain-, mold- and mildew-resistant.

Maintenance & Repairability:
  • Easy to clean and maintain with non-abrasive cleaners.
  • Small surface scratches can be sanded out.
  • Easy to clean and maintain with non-abrasive cleaners.
  • Coating allows for repairability.
  • Small surface scratches can be polished out.
  • Deep scratches may require technical assistance.
  • Easy to clean and maintain with non-abrasive cleaners.
  • Small scratches can be removed by applying a thin coat of automotive polishing liquid and buffing lightly with a clean cloth.
  • Deeper scratches may require technical assistnce.

Applicable Products:
  • Freestanding Tubs
  • Drop-In Tubs
  • Vessel, Semi-Recessed and Undermount Sinks
  • Wall-Mount and Pedestal Sinks
  • Counter-Sinks, Counter Tops and Vanity Sinks
  • Shower Bases
  • Freestanding Tubs
  • Freestanding Tubs
  • Drop-In Tubs
  • Alcove and Integral Skirted Tubs
  • Bar, Prep and Laundry Sinks
  • Kitchen Sinks
  • Specialty Baths including:
    • Walk-in-Tub
    • Specialty Tubs (very large and small)
    • Foot Spas